हमें कॉल करें now :08045802954

जांच भेजें

à¤à¤à¤¡à¤à¥à¤à¤¿à¤µ à¤ªà¥à¤°à¥à¤à¥à¤¸à¤¿à¤®à¤¿à¤à¥ à¤¸à¥à¤µà¤¿à¤ - M30 X 65-3à¤µà¤¾à¤¯à¤°-à¤¡à¥à¤¸à¥

जांच भेजें

Request To Call Back

Name: Inductive Proximity Switches - M30 X 65-3Wire-DC
Brand: SAI TECH CONTROLS

मूल्य/उद्धरण प्राप्त करें

ऑटोमेशन ग्रेड
Automatic

तापमान सीमा
-25°C to +70°C

रेटेड वोल्टेज
10-30V DC

रिस्पांस टाइम
≤ 1ms

मैकेनिकल लाइफ
>10 million operations

सुरक्षा स्तर
IP67

सर्किट टाइप
NPN/PNP (available)

मॉड्यूल की संख्या
Single

मैक्स। मौज़ूदा
200mA

फ़िनिश टाइप
Nickel Plated

प्रॉडक्ट टाइप
Inductive Proximity Switch

मटेरियल
Brass (Nickel Plated)

इन्सुलेशन प्रतिरोध
≥ 50MΩ at 500V DC

संपर्क प्रतिरोध
≤ 100mΩ

मैक्स। वोल्टेज
250V AC

परिचालन तापमान
-25°C to +70°C

साइज
M30 x 65 mm

रंग
Metallic Silver

वज़न
Approx. 80g

माउंटिंग टाइप
Flush Mounting

मौज़ूदा रेटिंग
200mA

ध्रुवों की संख्या
3 Wire

Frequency
50/60Hz

Repeat Accuracy
<5% of sensing distance

Supply Voltage
10-30V DC

Connection Type
Cable, 2 meters

Switching Frequency
500Hz

Shock Resistance
30G (300m/s²)

Vibration Resistance
10-55 Hz, amplitude 1mm

Output Type
NO/NC

Sensing Distance
10mm

मुख्य घरेलू बाज़ार
ऑल इंडिया

We are Manufacturer, Supplier, Exporter of Inductive Proximity Switches - M30 X 65-3Wire-DC and our setup is situated in Pimpri Chinchwad near Pune, Maharashtra, India.

Specification

Diameter	M30
Flush Switching Distance	10mm	15mm	22mm
non-Flush Switching Distance	12mm	16mm	40mm
Housing Material	Nickel plated brass	Housing Material	Nickel plated brass
With LED Without LED
Max Load Current	250mA
Supply Voltage	10-30 Volt DC
Switching Frequency	150KHz
Response Time	1ms/1ms
Protecting category	IP67
Operating Temperature	-25 degree C- +70 degree C
Short Circuit Protection	Yes
Connecting Type	2mtrs,3core pvc cable
DC 3 wire 10-30V NPN N.O.	STI- M30NO-10/12
DC 3 wire 10-30V NPN N.C.	STI- M30NC-10/12
DC 3 wire 10-30V PNP N.O.	STI- M30PO-10/12
DC 3 wire 10-30V PNP N.C.	STI- M30PC-10/12

High-Precision Sensing for Automation

Engineered for industrial automation, this inductive proximity switch excels in high-speed, precise object detection. The 10mm sensing distance and repeat accuracy under 5% enable consistent performance. It's suitable for automated production lines, conveyors, and robotic systems where quick and reliable feedback is vital.

Robust and Reliable Construction

Built with a nickel-plated brass body, the switch withstands harsh industrial environments. Its IP67 protection ensures resistance to dust and water, while vibration and shock resistance let it operate even in demanding conditions. The device remains dependable across a wide temperature range, from -25C to +70C.

FAQ's of Inductive Proximity Switches - M30 X 65-3Wire-DC:

Q: How do I install the Inductive Proximity Switch M30 X 65-3Wire-DC?

A: For installation, mount the switch flush on a metallic or non-metallic surface using the provided hardware. Connect the 2-meter cable's three wires according to your circuit type (NPN or PNP) and ensure the supply voltage is between 10-30V DC. The orientation should allow the sensing face to detect the target within a 10mm range.

Q: What are the main benefits of using this proximity switch in automation systems?

A: This proximity switch offers non-contact object detection, fast 500Hz switching frequency, under 1ms response, and long operational life, reducing maintenance and downtime. Its robust construction and IP67 rating assure reliable performance in harsh industrial settings.

Q: When should I choose the NO (Normally Open) or NC (Normally Closed) output type?

A: Select NO output if you want the switch to activate only when a target is detected, while the NC output is preferred for circuits that require a maintained signal until an object is sensed. The switch conveniently supports both configurations for flexible system integration.

Q: Where can this proximity switch be applied?

A: It is ideal for use in packaging machines, automated assembly lines, material handling, and robotics. Its durability and resistance to environmental challenges make it well-suited for use in industrial plants and workshops.

Q: What process does the switch use to detect objects?

A: It operates via electromagnetic induction to sense metal objects within its 10mm range, ensuring accurate, non-contact detection without physical wear, making it suitable for high-speed applications.

Q: How does the 2-meter cable enhance the installation process?

A: The pre-attached 2-meter cable simplifies field wiring and allows flexible placement of the sensor, enabling installation in hard-to-reach or confined spaces without the need for costly extensions.

Tell us about your requirement