About Inductive Proximity Switches - M18-4Pin-DC
We are Manufacturer, Supplier, Exporter of Inductive Proximity Switches - M18-4Pin-DC and our setup is situated in Pimpri Chinchwad near Pune, Maharashtra, India.Specification
|
Diameter
|
M18
|
|
Flush Switching Distance
|
5mm
|
8mm
|
12mm
|
|
non-Flush Switching Distance
|
8mm
|
16mm
|
20mm
|
|
Housing Material
|
Nickel plated brass
|
|
With LED Without LED
|
|
|
Max Load Current
|
250Ma
|
|
Supply Voltage
|
10-30 Volt DC
|
|
Switching Frequency
|
300Hz
|
|
Response Time
|
0.5ms/0.5ms
|
|
Protecting category
|
IP67
|
|
Operating Temperature
|
-25 degree C- +70 degree C
|
|
Short Circuit Protection
|
Yes
|
|
Connecting Type
|
M12 Connector
|
|
DC 3 wire 10-30V NPN N.O.
|
STI- M18NO- 5/7-C
|
|
DC 3 wire 10-30V NPN N.C.
|
STI- M18NC- 5/7-C
|
|
DC 3 wire 10-30V PNP N.O.
|
STI- M18PO- 5/7-C
|
|
DC 3 wire 10-30V PNP N.C.
|
STI- M18PC- 5/7-C
|
Reliable Detection and Output FlexibilityThis switch provides precise and stable detection of metal objects up to 5mm (standard) or 8mm (extended) away. With both PNP/NPN and NO+NC circuit options, it caters to various control systems and applications. The built-in LED indicator instantly shows operation status for quick troubleshooting and verification.
Rugged Construction for Industrial EnvironmentsEngineered with a nickel-plated brass housing, this proximity switch withstands mechanical shocks up to 50G and vibrations ranging from 10-55Hz. Its IP67 rating ensures performance in wet, dusty, or demanding settings, making it suitable for a broad range of industrial automation applications in India.
Easy Installation and Long Service LifeThe flush mounting design and M12 connector (with a 2m cable option) simplify installation and maintenance. Designed for over 10 million operations, this switch ensures long-lasting reliability and low maintenance for your automation processes.
FAQ's of Inductive Proximity Switches - M18-4Pin-DC:
Q: How does the M18-4Pin-DC Inductive Proximity Switch detect objects?
A: This switch uses electromagnetic induction to detect nearby metallic objects within its specified sensing distance (5mm standard or 8mm extended) without making physical contact. When a metal target enters the sensing range, the output state changes, allowing for non-contact, wear-free sensing.
Q: What are the key benefits of using this sensor in automation applications?
A: It offers reliable, non-contact detection with high durability and resistance to vibrations, shocks, water, and dust (IP67). Short circuit and polarity protections, along with a clear built-in LED indicator, minimize downtime and maintenance, enhancing equipment lifespan and process stability.
Q: When should the extended 8mm sensing distance be used instead of the standard 5mm?
A: The 8mm extended sensing distance is ideal when you need to detect objects that cannot be positioned as closely to the sensor. It provides more flexibility in mounting and can accommodate varied installation requirements in automated machinery.
Q: Where can this proximity switch be installed for optimal performance?
A: This switch is designed for flush mounting in industrial control panels, conveyor systems, packaging lines, or any automated equipment where metal detection is required. Its rugged construction and IP67 protection allow it to perform in harsh industrial or outdoor environments.
Q: What is the proper process for wiring and connecting this sensor?
A: Utilize the M12 connector or the 2m cable (with cable type) to connect the sensor to your control system. Follow the wiring diagram for your chosen output type (PNP or NPN, NO+NC), and ensure your power supply is 10-30 VDC. The built-in LED will indicate operational status once correctly connected.
Q: How does the built-in LED indicator assist during usage?
A: The built-in LED offers immediate visual confirmation of the sensor's operation status. This makes setup, calibration, and troubleshooting straightforward, reducing the need for specialized diagnostic equipment during maintenance interventions.