Vibrator Controllers CUH SDVC34-XLR6.0A

Product Description

Product details

FEATURES :
Automatic Voltage Regulation: Eliminate feed speed variation caused by mains voltage fluctuation. 
Soft Startup: in order to avoid sudden shock to the feed material end vibratory feeder. the controller can gently increase output voltage from 0 to the preset value when startup. 
Preset Speeds : 4 preset feed speeds can be stored and output by external short-circuit signal. 
Remote ON/OFF Control: Each stde of the conttoller has 2 groups of ON/OFF control pins. Switch sensor or PLC can be connected to them to turn on/off the controller. 
Photoelectric ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to tum on/off the controller. 
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external polentiometer, a PLC. or a 1-5V DC signal. 
DC Control Output: The controller can output low voltage DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid.

an electrical relay or other external devices. 
Overheat Protection: if internal temperature of the controller gets too high. the conttoller will stop its output to protect itself. 
Over current Protection: If output current exceeds its rated value by misoperation.the controller will stop its output to protect the controller and vibratory feeder. 
Short -Circuit Protection: If output of the controller is short-circuited, the fuse inside the controller will be blown to protect the controller and vibratory feeder from further damage.