Call : 08045802954 Call : 08045802954

SDVC22-S: 5A

SDVC22-S: 5A

Product Details:

  • Frequency (MHz) Hertz (HZ)
  • Rated Voltage Volt (V)
  • Dimension(L*W*H) Millimeter (mm)
  • Weight Grams (g)
  • Supply Ability : 1 Pair Per Day
1 INR/Pair
X

Price And Quantity

  • 1 Pair
  • 1 INR/Pair

Product Specifications

  • Hertz (HZ)
  • Volt (V)
  • Grams (g)
  • Millimeter (mm)

Trade Information

  • Cheque, Cash in Advance (CID), Cash Advance (CA)
  • 1 Pair Per Day
  • 1 Week
  • Contact us for information regarding our sample policy
  • 3 % Extra
  • All India
  • ISO

Product Description


We are Authorised Dealer, Distributor, Supplier of Vibrator Controllers CUH Make - SDVC22-S:5A and our setup is situated in Pimpri Chinchwad near Pune, Maharashtra, India.


FEATURES :
Automatic Voltage Regulation: Eliminate feed speed variation caused by mains voltage fluctuation.
Soft Startup: in order to avoid sudden shock to the feed material end vibratory feeder. the controller can gently increase output voltage from 0 to the preset value when startup.
Preset Speeds : 4 preset feed speeds can be stored and output by external short-circuit signal.
Remote ON/OFF Control: Each stde of the conttoller has 2 groups of ON/OFF control pins. Switch sensor or PLC can be connected to them to turn on/off the controller.
Photoelectric ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to tum on/off the controller.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external polentiometer, a PLC. or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid.

an electrical relay or other external devices.
Overheat Protection: if internal temperature of the controller gets too high. the conttoller will stop its output to protect itself.
Over current Protection: If output current exceeds its rated value by misoperation.the controller will stop its output to protect the controller and vibratory feeder.
Short -Circuit Protection: If output of the controller is short-circuited, the fuse inside the controller will be blown to protect the controller and vibratory feeder from further damage.


TECHNICAL SPECIFICATIONS

      ITEM

Range

 

Unit

 

Description

Min

Max

Input voltage

85

260

V

AC RMS Value

Output voltage

0

260

V

Less than Input voltage

Output Current

0

5

A

 

 

Output Frequency

50/100

Hz

Mains Frequency is 50Hz

60/120

Hz

Mains Frequency is 60Hz

OutPut Power

0

1100

VA

 

Output Waveform

Tangent Sine

 

 

Viltage Adjestment Accuracy 1 v  
ON/OFF delay 0 20 s  
ON/OFF Delay Accuracy 0.1 s  
Soft Startup Time 0 10 s  
DC Control output Voltage 22 26 V DC output associated with ON/OFF control
DC Control output current 0 200 mA
Stand by Power Consumption 1.5 3 w  
Display Method 8 Digit LED Digital Tube

 

 

 

Control Method

1-5 V

Remote Speed

Control Voltage

Standard TTL Electric Level   Switching Signal
/   8 Buttons + 2LED screens

Work Space
Temperature

-10

60

°C

 

Non-Condensing

Work Space Humidity

10

85

  %


Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Vibrator Controllers CUH' category



Back to top
SAI TECH CONTROLS All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.