Pune, Maharashtra, India
Send Inquiry
SDVC20- S
Product Details:
- Frequency (MHz) 50-100 Hz Hertz (HZ)
- Rated Voltage 85-260 Volt (V)
- Energy Consumption 1.5-3W Energy
- Output Type Switching Signal
- Dimension (L*W*H) 111*76*48.5(L*W*H, mm) Millimeter (mm)
- Weight 285g (without accessory) Grams (g)
- Warranty 1 year
1 INR/Pair
X
SDVC20- S Price And Quantity
- 1 INR/Pair
- 1 Piece
SDVC20- S Product Specifications
- 1 year
- 50-100 Hz Hertz (HZ)
- 85-260 Volt (V)
- 111*76*48.5(L*W*H, mm) Millimeter (mm)
- 285g (without accessory) Grams (g)
- 1.5-3W Energy
- Switching Signal
SDVC20- S Trade Information
- Cheque Cash Advance (CA)
- 1 Piece Per Week
- 1 Week
- 3 % Extra
- All India
- ISO
Product Description
FEATURES :Automatic Voltage Regulation : Eliminate feed speed variation caused by mains voltage fluctuation.
Soft Startup : In order to avoid sudden shock to the feed material and vibratory feeder, the controller can gently increase output voltage from 0 to the preset value when startup.
Preset Speeds : 4 preset feed speeds can be stored and output by external short-circuit signal.
Remote ON/OFF Control : The controller has 2 groups of ON/OF control pins. Switch sensor ot PLC can be Connected to them to turn on/off the controller.
Photoelectric ON/OFF Control : The CUH Intelligent Photoelectric Sensor can be conrected to turn on/off the controller.
Remote Speed Control : Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 15V DC signal.
DC Control Output : The controller can output low voltage Dc power associated with logical relation setting of tne ON/OFF Control to drive a solenoid, an electrical relay or other exiernal devices.
Overheat Protection : If Internal temperature of the controller gets too high. the controller will stop its output to protect itself.
Overcurrent Protection : If output current exceeds its rated value by misoperation, the controller will stop its output to protect the controller and vibratory feeder.
Short-Circuit Protection : If output of the controller is short-circuited, the fuse inside the controller will be blown to protect the controller and vibratory feeder from further damage.
TECHNICAL SPECIFICATION
| Item | Range | Unit | Description | |
| Min | Max | |||
| Input voltage | 85 | 260 | V | AC RMS Vaule |
| Output voltage | 0 | 260 | V | Less than Input voltage |
| Output Current | 0 | 5 | A | |
| Output Frequency | 50/100 | HZ | Mains Frequency is 50Hz | |
| 60/120 | HZ | Mains Frequency is 60Hz | ||
| Output Power | 0 | 1100 | VA | |
| Output Waveform | Tangent Sine | | | |
| Voltage adjustmen Accuracy | 1 | V | | |
| On/OFF Delay Accuracy | 0 | 20 | s | |
| ON/OFF Delay Accuracy | 0.1 | s | | |
| Soft Startup Time | 0 | 10 | s | |
| DC Control output Voltage | 11 | 13 | V | DC output associated with ON/OFF control |
| DC Control output current | 0 | 200 | mA | |
| Stand by Power Consumption | 1.5 | 3 | w | |
| Display Method | 4 | Digit | LED Digital Tube | |
| Control Method | 1-5 | V | Remote Speed Control Voltage | |
| Standard TTL Electric Level | | Switching Signal | ||
| / | | 4 Buttons + LED screens | ||
| Work Space | -10 | 60 | °C | Non-Condensing |
| Work Space Humidity | 10 | 85 | % | |
Enter Buying Requirement Details
Other Products in 'Vibrator Controllers CUH' category
SAI TECH CONTROLS
All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.
Developed and Managed by Infocom Network Private Limited.
